|  | ZX-1 micro Array+ HD  | |||||||||||||||||||||||||||||||||||||||||||||||||
| Fiberoptic Connector Measuring Interferometers | ||||||||||||||||||||||||||||||||||||||||||||||||||
|  | ||||||||||||||||||||||||||||||||||||||||||||||||||
|  | ||||||||||||||||||||||||||||||||||||||||||||||||||
| 
 |  
 
 Repeatability based on 100 measurements without disturbing the connector between measurements MT/MPO® connector reproducability and repeatability is somewhat determined by the polish quality and surface geometry 
 | |||||||||||||||||||||||||||||||||||||||||||||||||
| Measured Parameter | Reproducibility - One Sigma | Repeatability - One Sigma | 
| Radius of Curvature | 0.5% | 0.25% | 
| Apex Offset | 3.0µm | 1.0µm | 
| Fiber Height | 2.5nm | 1.5nm | 
| Radius of Curvature | 3mm - Flat | 
| Apex Offset | 0-500µm (value calculated if outside of captured frame) | 
| Fiber Height | ± 6µm | 
| Principle of Operation | Michelson Interferometer (non-contact system) | 
| Measurement Speed | <30 seconds for MT/MPO® connectors. <1 second for single fiber (ex. auto-focus) | 
| Field of View | 3.0mm nominal - in the horizontal axis. Entire MT connector in the vertical axis | 
| Operating Wavelengths | 470nm to 645nm depending on mode (solid state sources) | 
| Power requirements | 100-120V and 210-250V AC 50/60Hz auto sensing | 
Due to continued product improvement, specifications are subject   to change without notice.
              
            
ZX-1 micro Array+ HD Home Page
              ZX-1 micro Array+ HD Configurations and Options
                ZX-1 micro Array+ HD Specifications
                ZX-1 micro Array+ HD Sample Images and QC Reports
            
            
Copyright© 1992-2025, Direct Optical Research Company
DORC® is a Registered Trademark of Direct Optical Research Company
Last modified: October 23rd, 2025
Tel: (727) 319-9000 sales@dorc.com
DORC®, 8725 115th Avenue North, Largo, FL 33773 USA
We respond to ALL e-mails within 24 hours - if you don't get our response, bypass our SPAM PREVENTION by clicking here!!