DORC's Home Page

Reproducibility and Repeatability

Measured Parameter	Reproducibility - One Sigma	Repeatability - One Sigma
Radius of Curvature	0.15%	0.05%
Apex Offset	1.0µm	0.2µm
Fiber Height	1.5nm	1.0nm

Reproducibility based on 50 measurements re-inserting connector between measurements
Repeatability based on 100 measurements without disturbing the connector between measurements

Measurement Range

Radius of Curvature	3mm - Flat
Apex Offset	0-500µm (value calculated if outside of captured field of view)
Fiber Height	± 6µm (with extended range option)

Other Specifications

Principle of Operation	Michelson Interferometer (non-contact system)
Measurement Speed	Less than 1 second (excluding manual or auto-focus)
Field of View	275µm nominal - with the ability to view over 1mm diameter of the connector endface
Operating Wavelengths	645nm/460nm and 545nm with extended range (solid state sources)
Power requirements	100-120V and 210-250V AC 50/60Hz auto sensing

Due to continued product improvement, specifications are subject to change without notice.

ZX-1 micro PMS+ Home Page
ZX-1 micro PMS+ Configurations and Options
ZX-1 micro PMS+ Specifications
ZX-1 micro PMS+ Sample Images and QC Reports